HystereseCurrentControlSinglePhase - Single Phase Hysteresis Current Controller

 Back to the index
Back to the top of index
Connection Diagram:
G1HG1L
ISOLL1IIST1

Connections(9)PositionRemark
ISOLL1 Left Reference Current L1
IIST1 Right Measured Current L1
G1L Top Gate Low Switch Leg 1
G1H Top Gate High Switch Leg 1
Parameters(2)DefaultRemark
Fs 10kHz Switching Frequency
HysteresisBand 100m Hysteresis Band in Ampere. If Iin-Iref>HysteresisBand the output becomes positive at the first clock signal
Function This controller compares the reference currents with the measured currents.
If ( Reference Current - Measured Current > HysteresisBand) the output is high. The gate signals are synchronized to the switching frequency.
Status Standard
Export of Embedded C Code YES
Select from Components\Library\Control\FieldOrientedControl
See also
CurrentControl, DirectVectorControl, DirectVectorControlParameters, HystereseCurrentControl, IdIqWslip, K_Tau, PMSMRotorFluxObserver, PWM_CONVERTER, PWM_CONVERTER_Fs_A, VCO, w2a, w2a_AdvanceAngle,
Back to the index
Back to the top of index

Online Helpclick here to get to the online help

© Simulation Research, www.caspoc.com