| TEL | ||||
| R | 
| |||
| S | ROTOR | |||
| T | ||||
| H1 | H2 | H3 | ||
BrushlessDC_NamePlateParameters - Brushless DC Permanent Magnet Machine Name Plate Parameters |
Back to the index Back to the top of index |
| TEL | ||||
| R |
| |||
| S | ROTOR | |||
| T | ||||
| H1 | H2 | H3 | ||
| Connections(9) | Position | Remark |
| TEL | Top | |
| T | Left | |
| S | Left | |
| ROTOR | Right | |
| R | Left | |
| H3 | Bottom | Hall Sensor input T |
| H2 | Bottom | Hall sensor input S |
| H1 | Bottom | Hall Sensor input R |
| Parameters(5) | Default | Remark |
| PolePairs | 1 | Number of Pole Pairs |
| Pnom | 5k | Nominal output power of the Brushless DC machine |
| Vnom[V] | 50 | Nominal peak voltage at nominal angualr speed Nnom |
| Nnom[rpm] | 500 | Nominal angular speed in RPM |
| Efficiency[0..1] | 0.9 | Efficiency, defines both winding resistance and friction losses default set to 0.9 |
| Function | Permanent Magnet Brushless DC Machine with trapezoidal back emf, based on he Name Plate Parameters | |
| Special | At least Pnom has to be specified | |
| Note | The inductance and resistance are given per phase. The resistance and inductance between two terminals equals 2*Rs and 2*Ls | |
| Status | Standard | |
| Select from | Components\Library\ElectricalMachines\Brushless | |
 |
Back to the index Back to the top of index |