| P1 | P3 | ||||
| |||||
| N1 | N3 | ||||
HCFL - Hot Cathode Fluorescent Lamp |
Back to the index Back to the top of index |
| P1 | P3 | ||||
|
| |||||
| N1 | N3 | ||||
| Connections(15) | Position | Remark |
| P3 | Top | |
| P1 | Top | |
| N3 | Bottom | |
| N1 | Bottom |
| Parameters(5) | Default | Remark |
| NegativeResistance[Ohm] | -5 | Negative voltage current Gas discharge relation |
| Vburn | 100 | |
| Vignition | 200 | |
| Rwire | 1m | |
| Lwire | 1uH |
| Function | The lamp ignites when the voltage accros the lamp is larger than Vignition. The lamp burns with an arc voltage equal to Vburn and a negative voltage current slope defiend by NegativeResistance | |
| Special | Be carefull with specifying Negative Resistance. Start with 1, run a simulatio and check the current and voltage waveforms. The Negative Resitance is limited to -Vburn/Iburn After checking the waveforms you can me Negative resistance gradually negative, to meet the HCFL specifications. | |
| Status | Standard | |
| Select from | Components\Library\Lighting\HCFL | |
 |
Back to the index Back to the top of index |