| P | |||
| C | |||
| R | |||
| TAU | |||
| VBURN | |||
| VIGNITION | |||
| Z_IRMS | |||
| N | |||
EEFL_Variable - External Electrode Fluorescent Lamp with variable parameters |
Back to the index Back to the top of index |
| P | |||
| C | |||
| R | |||
| TAU | |||
| VBURN | |||
| VIGNITION | |||
| Z_IRMS | |||
| N | |||
| Connections(16) | Position | Remark |
| Z_IRMS | Left | |
| VIGNITION | Left | |
| VBURN | Left | |
| TAU | Left | |
| R | Left | |
| P | Top | |
| N | Bottom | |
| C | Left |
| Parameters(0) | Default | Remark |
| Function | The lamp ignites when the voltage accros the lamp is larger than Vignition. The lamp burns with an arc voltage equal to Vburn and a negative voltage current slope defiend by NegativeResistance Irms is measured with a time delay of tau seconds. R and C should be changed depending on the value of Irms | |
| Special | Be carefull with specifying Negative Resistance. Start with 1, run a simulatio and check the current and voltage waveforms. The Negative Resitance is limited to -Vburn/Iburn After checking the waveforms you can me Negative resistance gradually negative, to meet the HCFL specifications. | |
| Status | Standard | |
| Select from | Components\Library\Lighting\EEFL | |
 |
Back to the index Back to the top of index |